Digital PH Meter for Water Hydroponics, PH Range is 0-14, High Accuracy

Digital PH Meter for Water Hydroponics, PH Range is 0-14, High Accuracy

Digital PH Meter for Water Hydroponics, PH Range is 0-14, High Accuracy

Regular price Rs.2,500.00 Sale price Rs.2,200.00
  • ✔HIGH ACCURACY: PH tester has a sensitive electrode sensor ,simply press "ON", It only takes a few seconds for your result to appear on screen.read accurate pH levels. The included detailed manual will show you how to get the best accurate and stable reading.
  • ✔Wide Use:PH reader for water with High quality glass PH probe, The digital ph meter kit suitable for multiple occasions, such as Testing Ph Balance of Drinking Water, Pool, Aquarium, Ro System, Spa, Hydroponics, pond in a garden, urine, soap mixtures, food, wine, beer or any other liquids. This ph tester digital is the ideal test kit for home and laboratory uses.

  • ✔ AUTOMATIC TEMPERATURE COMPENSATION: No more need to take care about the temperature of testing liquid, as ph meter has built in (ATC) automatic temperature compensation, so that it can accurately determine pH value of the sample at any temperature in a range of 0°C - 80°C (32°F - 176°F)
  • Features:

    Measurement Range and Accuracy
    Wide Measurement Range: Covers a broad range of TDS levels (e.g., 0-9999 ppm) to suit various water types.
    High Accuracy: Provides precise measurements with minimal deviation.
     Automatic Temperature Compensation (ATC)
    Temperature Adjustment: Automatically adjusts readings based on water temperature to ensure accuracy.
     Calibration Functionality
    Auto Calibration: Automatically calibrates the meter to maintain accuracy without manual intervention.
    Manual Calibration: Allows for manual calibration using standard solutions if needed.

    Specification:

     Measurement Range
    TDS Range: Typically from 0 to 9999 ppm (parts per million) or mg/L (milligrams per liter).
    Accuracy and Resolution
    Accuracy: ±1-2% of the reading, depending on the model.
    Resolution: Often 1 ppm or 0.1 ppm, allowing for precise readings.
     Temperature Compensation
    Automatic Temperature Compensation (ATC): Typically compensates for temperatures between 0°C to 50°C (32°F to 122°F).
     Calibration
    Calibration: Automatic calibration or manual calibration with standard solutions. Some models offer single-point or multi-point calibration.

  • ✔Make You Satisfied With The Products: Come with 1x PH meter, 1x user manual, 3x 1.5V LR44 button cells(build-in), 3x PH Buffer Powders.
  • ✔Family Essentials:Every Family need ph tester for water, Healthy drinking water range from pH 6.5 - ph 8.5, Don't need calibrate in the first time, Pls use the water ph meter directly, our PH meter comes factory calibrated, but In case of long period of inactivity or after a frequent use, Pls recalibration your ph water tester digital before use. you can calibrate the tester with one touch button using Buffer Powder.
  • How to use digital ph tester ?

    1.Remove the protective cap and protective film on the screen.

    2.First rinse the electrode with distilled water ,and suck with filter paper.

    3.Turn the meter on by pressing the "ON/OFF" key.

    4.Immerse the pH meter electrode in the solution to be tested (can not be over the immersion line)

    5.Stir gently and wait around 30 seconds till the reading stabilized.

    6.After finished ,clear the electrode with pure water,turn the meter off by pressing the "ON/OFF" key.

    7.Always replace the protective cap after use.

     

    Attention of pH meter digital water tester

     

     

    1.Don't touch the electrode by hard tools or fingers.

    2.Clean the electrode every time before and after using.

    3. Always replace protective cap after using digital meter to keep electrode from drying out due to prolonged exposure to air ,which leads to slow or unstable readings

    4. if electrode has been dried out immerse it into distilled water for a

    5. When the display value is fuzzy or unshown,The Battery should be replaced promptly.Pay attention to the polarity of battery, then need to recalibrate the meter.

    6.if you calibrated the meter in the air or in wrong calibration solution, there will flash "ERR" on the screen,The meter will return to last step operation.if necessary ,recalibrate the meter.

    7.if you have done all steps as the manual ,the meter still does not work,please let us know it , thanks

30 Days Guarantee


Your satisfaction is our priority! Not satisfied with your purchase? No worries! Enjoy a 30-day return or exchange on all products—quick, easy, and hassle-free.





Learn more

Easy Returns

We want you to shop with confidence.If there is any problem or issue in your order or quality issue , you can return it within 7 days of delivery by contacting our team



Learn more

Fast shipping

Enjoy free shipping on all orders.We offer fast and efficient shipping throughout Pakistan, with delivery typically completed within 3 to 4 working days after placing your order.



Learn more